Is My Eero Blinking Blue After Reset ? – Here’s How to Fix It

When you are using the eero, you may notice that the light keeps Eero blinking blue. This can be frustrating, especially when you’re not around anyone to help you. Fortunately, this problem can be easily fixed. Here are some steps you can take to get your eero back up and running again. Listed below are a few common solutions to the problem. Read on for more information.

Disconnect the Ethernet cable from your eero. Wait about 30-60 seconds. Then, reconnect the power cable. Check whether the eero is blinking blue. If it doesn’t, you need to reset it again. If the blue light is still blinking, you need to try resetting the eero. If so, open the eero app and sign in to your account. Go to the Settings section. Tap the Advanced option.

If you’re still seeing the blinking blue light after a hard reset, the device may have forgotten to enter its pairing mode. Once the pairing process has been completed, you should be able to connect wirelessly between your eero and other devices. Once you’ve done this, you’re ready to set up your eero again. If you can’t get your eero to connect, you can always call a technician and have them do it for you.

Why is my eero blinking blue?

If your eero light is blinking blue, you’re not alone. It can happen at any time, but most people have trouble figuring out why it’s happening. It might be a weekend or the middle of the night, when support isn’t available. Here’s how to fix it yourself. After the problem occurs, the eero should begin blinking white again.

First, make sure you’re not unplugged or out of range. This is often the cause of the eero’s blue light. Check that your phone is plugged into your modem and ethernet cable is properly connected to the router. If it still doesn’t connect, try restarting the modem or router. If none of these options help, call Eero customer service and they’ll help you troubleshoot the issue.

If the eero light is blinking blue, you may need to reset the unit. You can do this manually or with the help of a remote technician. The first step is to reconnect your eero to the internet. You can do this by following the instructions in the app. If you’re able to do this, you’ll be able to access the eero’s settings in seconds.


If you’re unable to get your eero to connect, try resetting it. If the light is green and a solid white one, the internet connection is okay. The red light means the device isn’t connected to the network. The solution to this problem is to hard-reset the eero by pressing the reset button seven times. Once the eero returns to the network, it will appear with a blue light. You can then proceed with setting up the eero.

How do I stop my eero from blinking blue?

When your eero starts to blink blue, you may not be able to locate it. This can be a frustrating experience, especially if it happens on a weekend or at night, when support is unavailable. Luckily, there are a couple of ways to resolve this problem. First, try to turn off the blue LED status light. Then, you can try to restart the Eero. If that doesn’t solve the issue, it’s possible that your eero needs a factory reset.

If you’re still seeing blue light, the problem could be with the Ethernet cable or with the internet connection. To solve this problem, try to disconnect the device from your modem and reconnect it. If it still fails to connect, you should contact your ISP. To test your internet connection, check to see if the Ethernet cable is plugged tightly in the port. If it’s not, it’s time to replace the cable or the modem.

If the blinking blue light is the result of a failed connection, you should reboot the device. Make sure the eero is powered on before resetting it. If you see blinking yellow or solid white lights, this means your eero is connected to the network and is in pairing mode. If the light is flashing red, it’s not connected to the internet.

Why is the blue light flashing on my router?

When the light on your router blinks green and turns off, it means your internet connection is slow or not as strong as it could be. Restart your router to see if the issue is resolved. If not, contact your network provider. If your blue light persists, try unplugging and re-plugging it. Then, reconnect your device to the same location. In some cases, the blue light may be caused by a power failure. If this doesn’t work, contact your network provider for further assistance.

If the problem persists after a reboot, contact your network provider. This should help resolve the issue and your router should continue to function normally. If you’ve secured the connection, the router should be working without any further trouble. If not, contact your network provider and ask for assistance. If the problem persists after rebooting, you can also consider removing any physical obstructions that might be blocking the wireless signal.

If the blue light is flashing on your router, you might have a faulty cable box connected to your modem or router. If the faulty splitter is causing this problem, you can try removing it and reconnect your device to the router. If the problem persists, your network provider may have reset the router, which may have caused the blue light to appear. Once the switch is back on, the network should function normally.

Leave a Comment