Eero Blinking White: Why and How to fix it?

If you want to set up a nested network at home, one of the best Network Solutions is Eero. Although this system works very well, just like any other network device, problems may arise from time to time. One of the issues that we will discuss in this article is the white light flashing Eero and what needs to be done to fix it.

Eero Blinking White Light: what does this mean?

If you look at your Eero, you won’t be able to miss the LED light. It shows the current status of the router and whether everything is working properly. Depending on the current status of the router, this led eero will change color.

If everything is normal, this LED indicator should be completely white. If you notice that your Eero is blinking white, it means that it started or connect to the internet. Usually it should not take long, but some users report that Aero blinks white constantly for a long time and is not connected to the network.

How To Fix The Eero Blinking White Light?

Sometimes the signal from the router is too weak to establish a normal connection. This is something that your ISP should check and fix. Usually, if your ISP performs planned maintenance or has a service failure for some reason, then you either will not be able to receive the signal at all or the signal is weak. This may cause the router to emit a weak signal, so your Eero will start flashing white as it keeps trying to connect to the internet.

To solve this problem, the only thing you can do is contact your ISP and ask if there are any problems with its service. If you are undergoing maintenance or have maintenance problems, all you have to do is wait until the problem is resolved. Usually these problems do not last long.

However, if the problem is not with your ISP, please try the following solution.

Delete And Add the Problematic Eero

If Eero is not working properly, you can try the following solution for a quick correction: delete it from the application and add it again. This is one of the best ways to deal with some connection issues. In this guide, you will learn how to add and remove Eros to your Network.

Eero Blinking White

Unlock your Eero

The Eero power cycle is a simple and straightforward process that can eliminate any network problems that may arise. Due to its simplicity, it is often used, here’s what you need to do.

  1. Disconnect the Eero from the power supply.
  2. Wait for half a minute.
  3. Reconnect it to the power supply and wait for it to start.

If this does not cause the white light to flicker, please continue the next step-soft reset Eero.

Restart the network

When we talk about restarting the network, we don’t just mean restarting the router or modem. We mean the power supply of all devices in the network: routers, modems, Eero.

First disconnect Eero from the power supply and plug it in after half a minute. It will settle within 2 minutes.

Then disconnect the modem from the power supply. Plug it in within half a minute and wait for all LED lights to stabilize.

Now check if the White Light is still blinking.

Reset your Eero (soft reset)

Soft reset is the next solution that you can try to solve the problem of white flashing lights. Unlike a factory reset, it saves the settings you made with Eero.

  1. Find the reset button on Eero.
  2. Press and hold for 5-10 seconds until the yellow LED flashes. Release the button when this happens.
  3. Wait a moment until the LED indicator turns red.

However, if it continues to flash, you can reset Eero to factory settings.

Reset Eero settings to factory settings

As a last resort, we recommend resetting the factory settings in Eero. This is because restoring the factory settings will delete all configurations and settings and delete Eero from the home network.

  1. Find the reset button.
  2. Press and hold for about 15 seconds until you see a flashing red light.
  3. Release the button.
  4. After the factory reset is complete, eero will start flashing blue. This means that you can reset it from scratch.
Leave a Comment

bets10 girişmatbet